DRIP KIT uses Drip Tape. Drip Tape is a thin walled tube. It is normally flat and becomes round when water flows through it. There is no dripper in drip tape. Only simple holes are made with nano technology. Water flows continuously like a jet instead of drop by drop. The major advantage of this technology is that there is NO CLOGGING problem.

KSNM DRIP TAPE is very simple and affordable by small farmers. KSNM removes the entry barrier for small farmers to adopt drip irrigation technology. Water flows like a jet instead of drop by drop as seen in the photo. There is no dripper in the tube. Instead, simple holes are made to drip tube. Hence clogging problem will never occur. There will be No blockage of holes. Suitable only for above ground installation.

Grommet / 16 mm is used to connect take off connector with PVC pipe.

Take Off Connector / 16 mm Lock is used to connect Drip Tape / 16 mm with the grommet or washer in PVC pipes.

Take Off Connector with Valve / 16 mm Lock is used to connect Drip Tape / 16 mm with the grommet or washer in PVC pipes.

Straight Connector / 16 mm Lock is used as joiner for Drip Tape / 16 mm or flat inline / 16 mm if there is any damage in the drip tape.

Straight Connector / Barbed / 16 mm Lock has barbed connector on one side and lock connector on the other side. It is used to connect round drip irrigation lateral tube with thin walled drip tape.

End cap / 16 mm is used along with DRIP TAPE 250 / 16 mm or flat inline / 16 mm

Tee Connector with Valve / 16 mm Lock is used to form "T" shaped connection between drip tape / 16 mm.

The dill bit is made up of stainless steel material and handle is made up of plastic material. It is very rugged and last long. This is used to drill the PVC pipe so that grommet / 16 mm can be fixed for take off connector. Laterals are connected to the take off connectors. Designed for easy and comfortable handling.

Drip Kit / 50 sqm contains irrigation tube and connectors required for an area of 50 Sqm

1. It operates on gravity system and requires no electricity. 2. Operates under very low pressure condition. 3. Very simple and easy to install. 4. Water flow to each drip line can be controlled with the T tap valve 5. It is portable and can be easily shifted. 6. Labour costs are reduced drastically due to simplicity of the drip system. 7. Drip Kit system requires approximately 60 to 70% less water when compared with the traditional surface irrigation 8. Modular design and hence can easily be expanded to bigger areas.