FLAT INLINE is flexible drip lateral tube. Thickness is 200 Micron / 0.2 mm / 8 mil.Diameter - 16 mm. Discharge - 4 LPH. Dripper Spacing - 40 cm
KSNM Flat Inline Drip Irrigation Lateral is produced with high-grade virgin polyethylene plastic granules. Thickness is 200 Micron / 0.2 mm / 8 mil.Diameter - 16 mm. Discharge - 4 LPH. Dripper Spacing - 30 cm
FLAT INLINE is flexible drip lateral tube. Thickness is 400 Micron / 0.4 mm / 16 mil.Diameter - 16 mm. Discharge - 4 LPH. Dripper Spacing - 40 cm
FLAT INLINE is flexible drip lateral tube. Thickness is 400 Micron / 0.4 mm / 16 mil.Diameter - 16 mm. Discharge - 4 LPH. Dripper Spacing - 50 cm
FLAT INLINE is flexible drip lateral tube. Thickness is 400 Micron / 0.4 mm / 16 mil.Diameter - 16 mm. Discharge - 4 LPH. Dripper Spacing - 60 cm
Take Off Connector / 16 mm Lock is used to connect Drip Tape / 16 mm with the grommet or washer in PVC pipes.
Take Off Connector with Valve / 16 mm Lock is used to connect Drip Tape / 16 mm with the grommet or washer in PVC pipes.
Straight Connector / 16 mm Lock is used as joiner for Drip Tape 16 mm if there is any damage in the drip tape.
Straight Connector / Barbed / 16 mm Lock has barbed connector on one side and lock connector on the other side. It is used to connect round drip irrigation lateral tube with thin walled drip tape.
Tee Connector with Valve / 16 mm Lock is used to form "T" shaped connection between drip tape / 16 mm.
The dill bit is made up of stainless steel material and handle is made up of plastic material. It is very rugged and last long. This is used to drill the PVC pipe so that grommet / 16 mm can be fixed for take off connector. Laterals are connected to the take off connectors. Designed for easy and comfortable handling.
Sort
Products
Products
